BitEdit Plugin Bosch ME(G)17.9.2x

A module for the BitEdit calibration software to work with files of Bosch ME(G)17.9.21, ME(G)17.9.22 and ME17.9.2 ECUs of Kia and Hyundai vehicles with naturally aspirated petrol engines.

Available Maps

• Air charge control: Mass air flow pulsation correction, target air filling
• Exhaust gas: Ignition angle correction by EGT, static exhaust gas temperature Injector control: Start of 1st injection, start of 1st injection during start, start of 1st injection in warm mode
• Knock control: Knock sensitivity, detonation regulation window, spark advance retardation step, detonation measurement window
• Limiters: Engine speed limitation from coolant, oil, intake temperatures
• Spark advance: Angle characteristic map for knock correction, delta ignition base, minimal spark advance, delta ignition for overboost protection, optimal spark advance, spark advance base
• Throttle valve control: Airmass flow through throttle valve, throttle valve position, throttle position from pedal position direct law
• Torque model: Drag loss torque, optimal indicated torque, full load detection threshold, ignition angle efficiencies, lambda efficiency, maximal indicated torque in normal and sport modes, minimal efficiency
• Torque request: Requested torque on all gears and modes, inverse pedal position map for torque checkout
• VVT: Intake camshaft position at catalyst heat, intake camshaft position base, intake camshaft position warm engine
• Warm up: Warm up correction for combustion, weighting factor for combustion for both temperatures, temperature correction factor for throttle
• DTC mask editor

Supported SW

Technical Support

The technical support is provided by the manufacturer of this software.

Manufacturer

BitSoft LLC, St. Petersburg, Russia. License Agreement.