K-TAG is used to read and write the ECU while on the bench. The MPC, EEPROM, and flash memory can be accessed by connecting the tool to the ECU board. It supports cars, motorcycles, trucks, tractors, and boats.
- Identification of the vehicle
- Reading and writing of the MPC, EEPROM, and flash memory components
- Automatic checksum correction
- Backup and Restore capabilities in the event of error
- Removal of the write-protection to allow the flashing via OBD with other tools
- Bootloader Infineon Tricore / ST10Fxxx
- BDM Motorola MPC5xx
- JTAG Freescale MPC5xxxx
- NBD NEC 76F00xx Toyota
- JTAG Nexus MPC5xxx
- JTAG Renesas SH705x
- Bootloader Mitsubishi MH72xx/MH8xxx
- BDM Motorola 68000HC
- BDM Motorola HC12
- Bootloader RENESAS M32
The protocols are sold separately.
K-TAG Slave is designed to work under a Master tool. You read the encrypted original file, send it to the owner of the Master tool you are connected to and get a modified file back from him. The modified file is also encrypted and can only be used with your Slave tool. You don't have access to decrypted files and can't modify files yourself.
With a Master tool you will have the complete access to the files of the ECUs by reading the original file and writing back the modified one yourself.
K-Suite is a software that comes with K-TAG and installs on your Windows PC. All the operations with the tool are performed using this program. It has a simple interface and step-by-step instructions with pictures.
This software is universal and supports both K-TAG and KESSv2 in Master and Slave versions.
Please be aware that it's required to have an active internet connection in order to work with it.
- Alientech K-TAG Slave (14KT00KTAS)
- Basic connection kit (144300KTST)
- Multifunction cable (14P600KT02)
- Infineon Tricore EDC GPT cable (14P600KT03)
- Infineon Tricore MED GPT cable (14P600KT06)
- USB cable
- Battery cable (144300K218)
- Power supply adapter
- Plastic case
- K-Suite software
- User manual
Warranty & Support
This item has a standard one year warranty. The technical support is provided by the manufacturer.
Alientech S.r.l., Italy.
Software Plugins & Licenses
This update introduces the support of reading and writing of Bosch MG1CS011 in Service Mode with K-TAG. This ECU is …
Mercedes AMG GLC43, GLE43, GT43 and GT53 Coupè were added to the vehicle list of K-TAG. Bosch MG1CP002 in KSuite …
Two new protocols were added to the vehicle list of K-TAG. This update will allow you to work with many …
This update will allow you to work with the following ECUs: Bosch EDC16C2, EDC16C8, EDC16C32, EDC16C35, EDC16C34 and EDC16C39, which …
Bosch EDC7 is the most widespread ECU on the work vehicles and is used on many buses, tractors, earthmovers and …
KSuite v3.94 includes six new protocols within the JTAG, Bootloader ST and Service Mode communication methods. Continental ACM Model ECU …
New Buick, Cadillac, Chevrolet, GMC, Holden and Opel vehicles with diesel and petrol engines and ACDelco E80, E82, E87 ECUs …
Honda Civic Type R is now supported by KESSv2 via OBD using the protocol #734. The ECU Bosch MED17.9.3 is …
This update will allow you to work with many VAG, PSA, Volvo and Mercedes-Benz vehicles with diesel and petrol engines …
Bosch MD1CE101 (MCU TC299) is now supported by K-TAG in Service Mode. This ECU is installed on Case IH, Class …