• Worldwide shipping
  • Chip tuning and vehicle diagnostic equipment

Alientech K-TAG Slave On Bench Programmer

Ships Worldwide 14KT00KTAS
Out of Stock
  • $647.69

K-TAG is used to read and write the ECU while …

K-TAG is used to read and write the ECU while on the bench. The MPC, EEPROM, and flash memory can be accessed by connecting the tool to the ECU board. It supports cars, motorcycles, trucks, tractors, and boats.

Supported Functions

  • Identification of the vehicle
  • Reading and writing of the MPC, EEPROM, and flash memory components
  • Automatic checksum correction
  • Backup and Restore capabilities in the event of error
  • Removal of the write-protection to allow the flashing via OBD with other tools

Available protocols

  • Bootloader Infineon Tricore / ST10Fxxx
  • BDM Motorola MPC5xx
  • JTAG Freescale MPC5xxxx
  • NBD NEC 76F00xx Toyota
  • JTAG Nexus MPC5xxx
  • JTAG Renesas SH705x
  • Bootloader Mitsubishi MH72xx/MH8xxx
  • BDM Motorola 68000HC
  • BDM Motorola HC12
  • Bootloader RENESAS M32

The protocols are sold separately.

Slave Version

K-TAG Slave is designed to work under a Master tool. You read the encrypted original file, send it to the owner of the Master tool you are connected to and get a modified file back from him. The modified file is also encrypted and can only be used with your Slave tool. You don't have access to decrypted files and can't modify files yourself.

Master Version

With a Master tool you will have the complete access to the files of the ECUs by reading the original file and writing back the modified one yourself.

K-Suite Software

K-Suite is a software that comes with K-TAG and installs on your Windows PC. All the operations with the tool are performed using this program. It has a simple interface and step-by-step instructions with pictures.

This software is universal and supports both K-TAG and KESSv2 in Master and Slave versions.

Please be aware that it's required to have an active internet connection in order to work with it.

What's included

  • Alientech K-TAG Slave (14KT00KTAS)
  • Basic connection kit (144300KTST)
  • Multifunction cable (14P600KT02)
  • Infineon Tricore EDC GPT cable (14P600KT03)
  • Infineon Tricore MED GPT cable (14P600KT06)
  • USB cable
  • Battery cable (144300K218)
  • Power supply adapter
  • Plastic case
  • K-Suite software
  • User manual

Warranty & Support

This item has a standard one year warranty. The technical support is provided by the manufacturer.


Alientech S.r.l., Italy.

Software Plugins & Licenses

Alientech K-TAG Slave Full Activation

Software update
K-TAG: Bosch MD1CE101 in Service Mode


Bosch MD1CE101 (MCU TC299) is now supported by K-TAG in Service Mode. This ECU is installed on Case IH, Class …

Read more
Software update
KESSv2: Bosch ME17.2.42 BMS-O


The BMW Motorrad S 1000 RR and R 1250 models are now supported over OBD by KESSv2 (protocol #724). The …

Read more
Software update
K-TAG: DENSO & DENSO VEA in Service Mode


The list of vehicles supported in service mode has been extended more and now includes Hyundai, Mazda, Dodge, Mitsubishi, Subaru, …

Read more
Software update
K-TAG: Ford, Mahindra, Kia, Hyundai and Nissan Update


This update includes many new vehicles with Continental EMS2513, Bosch MEG17.9.21, Bosch EDC17CV54 and Bosch EDC17CP51 ECUs. Ford Model ECU …

Read more
Software update
K-TAG: Mitsubishi L200 2.2 DI-D with ECU Denso 275722-4810


K-TAG now supports Denso 275722-4810 ECU — the one that's installed on the fifth generation of the L200 pickup. This …

Read more
Software update
K-TAG: Bosch MDG1 of BMW, Ford and Mercedes


Bosch MD1CS006, MG1CS024 and MG1CS016 are now supported by K-TAG in Service Mode (SM). These ECUs are installed on many …

Read more
Software update
K-TAG: Marelli MJD6F3, MJD6JF, IAW 10GF and Continental CM2350B


The support for many new Alfa Romeo, FIAT, Lancia, Dodge and Jeep vehicles was added to KSuite v3.82. Marelli MJD6F3 …

Read more
Software update
K-TAG: Valeo V46.11, Continental Simos 18.10, Bosch MG1


KSuite v3.80 introduces the support of new Bosch, Valeo and Continental ECUs of VAG and PSA vehicles such as Audi, …

Read more
Software update
K-TAG: Marelli MJ8F3, MJ8DF, Bosch EDC17 and MD1 in Service Mode


With the latest version of the KSuite software (v3.78) it is possible to read and write Marelli MJ8F3, MJ8DF, Bosch …

Read more
Software update
K-TAG: Continental Simos and PCR2.1 in Service Mode


Continental PCR2.1, Simos 8.3, Simos 8.4, Simos 8.5, Simos 12.1 and Simos 12.2 are now supported by K-TAG in Service …

Read more
Frequently bought together
Related products
You might also like