A module for the BitEdit calibration software to work with …
A module for the BitEdit calibration software to work with files of Hitachi Gen1 ECUs (MCU Renesas SH7058) of Nissan vehicles with turbocharged petrol engines. Supported models: Juke 1.6T, Tiida 1.6T, GTR.
Desired boost pressure, boost pressure limitation factor, boost pressure cutoff multiplier, wastegate duty from rpm and boost, target wastegate duty, wastegate multiplier, catalyst temperature map, closed map injection map, open loop enrichment map for part load and full load, target a/f gains, throttle valve injection compensation, scalings for: A/F sensor, MAF, Throttle valve opening angle, basis for QH0 calculation, spark advance trimming maps for low and high octane, base trimming, optimal spark advance for high and low octane fuel, unburned advance compensation, knock sensivity curve per cylinder, engine torque map, QH0 to torque conversion maps, powertrain force map, maximal and minimal powertrain force, engine speed limitation, vehicle speed limitation (when found), DTC error mask.
The technical support is provided by the manufacturer of this software.
BitSoft LLC, St. Petersburg, Russia. License Agreement.